Search the forum,

Discuss Help with problem re: Cold water from basin hot tap on combi system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

End Feed

Hi All, I'm not Gas Safe so don't touch boilers, (as one shouldn't when not Gas Safe), however, a customer called me to ask if I could fix a problem thats just started to happen with their combi system in a small flat with 5 radiators.
When they turn on the hot tap at the bathroom basin it runs cold until they turn on the tap on the kitchen sink then the water from the basin hot tap comes out hot.
No problem with the kitchen sink hot tap, this gives hot water every time.
They have a service contract with that energy supplier from north of the border and southern (not mentioning any names). They called out the service engineer but all they suggested was the system needed a powerflush (at £500 cost, probably 'cos they get a bonus on extra products sold), but the Central Heating side of the system is working fine so don't see how that will cure the problem. It's not a problem for me to solve but thought I'd ask you guys who know so that I can give the customer some advice for when the service engineer comes out again to blind them with science and suggest a powerflush as a solution. I'd be grateful for any help/advice.
 
well you do not say make of boiler,it could be the diagram in the combi is worn,or maybe ,if they have a shower mixer ,the non return valve on the hot side has failed,therefore when hot tap on basin is turned on,cold is also being drawn from the shower,to check ,if surface mixer,run shower till hot ,turn off,then turn basin hot tap on,see if hot side of shower goes cold

As you say not really likely to require a power flush but I will do it for £ 498.30 ;):)
 
Did you actually ask her how many rads she had?
Just joshing.
Might be a flow switch problem. What boiler is it?
How much are they turning the basin tap on?

Disappointing to see SSE (i'll name them) are adopting big gas attitude with everything being down to a powerflush as they started as a decent company.
 
Thanks for the rapid replies guys. I don't know the make of boiler but will ask, also I will ask if they have a shower mixer. Thanks also for the bargain price for a powerflush. I'll advise the customer to take you up on that......
 
Status
Not open for further replies.

Reply to Help with problem re: Cold water from basin hot tap on combi system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
113
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
112
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock