Search the forum,

DIY

Post new thread

Discuss DIY in the USA area at PlumbersForums.net

G

grr2108

Messages
1
DIYer’s question ….. but what is this at back of the toilet under the rim?
am having problem with a full toilet flush. Have changed the cistern valve.
ciuld this be stopping the water getting all around the pan and should it be there!!

thanks all.
 

Attachments

  • 8E11634F-6552-4B3B-B806-17A67FDE6C4C.jpeg
    8E11634F-6552-4B3B-B806-17A67FDE6C4C.jpeg
    598.3 KB · Views: 28

Reply to DIY in the USA area at PlumbersForums.net

Similar plumbing topics

127bit
How to reinforce shower pan threshold?
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The front right corner shim is 5/8", the left front corner is 3/8" shimmed, with shorter shims under left middle and right rear corner. The pan perimeters...
Replies
6
Views
185
127bit
127bit
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
354
Chuck
C
B
    • Friendly
Posting a thread as until now I've only read the forum
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
143
turnpin
turnpin
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
534
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
198
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Forum
Tiling Standards BS5389
UK Tiling Forum
Tiling Tools for Beginners
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock