Hello
I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen.
The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
I have done pressure test for 2" high pressure pipe line by closing the pipe with rubber plugs at the ends. It was 3 bar and I kept it for 24 hours. Its shows a pressure drop of 0.5 bar. The pipe line is fully exposed and I couldn't find any leak on them. What might be the problem. If somebody...
Hi all
I need to run this CH pipework to a radiator located beyond the electric wiring in the image below.
Just to be safe I was wondering if there are any rules / distances, etc I need to be following when avoiding the wiring?
Many thanks. P
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The front right corner shim is 5/8", the left front corner is 3/8" shimmed, with shorter shims under left middle and right rear corner.
The pan perimeters...
Any one know how he"s doing as he has been ill.
Hi all I have a britony combi se 80 with fault 40 60 80 had british gas out to repair under homecare cover but they can't seem to repair it. They have been out 7 times so far and fitted a new pump heat exchanger air pressure switch and a pcb. Does anyone on here know what else could be the...
I Think I want a Thermostatic shower valve. Can these be added/installed to an existing shower?
Hi,
Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably no need for me to needlessly heat hot water. My intention was to turn the boiler off along with the mains water when going away.
Now, I have heard...
We have hot water, tank for hot water why is the hot water boiling hot from tap,and shower,
We are on a schedule for hot water via our hive app 2hrs in morning 2 hrs in evening
Any help be much appreciated
Water Heater Screaming Sound on Cold Water Line Spring Check Valve
Have this water heater for around 1 year, and it started doing this some time ago.
Any suggestions on how to fix this?
What is the boiler flow temperature required to flag this 2965 fault code?.
This, I believe, is a blocking code that trips the burner but when/if it resets. the burner will refire without any boiler reset?
If this fault code is up while in CH mode and there is a demand for HW, will the boiler...
Wanted old Ideal Standard Concorde Boiler for spare parts. If you are removing one please let me know. Thanks
When I turn on the shower or bath, initially the pump runs (quite loudly) and only a trickle comes out. I have to alternate turning on the bath and shower before I get a reasonable flow. Then once it is running, if the water is at maximum temperature on the mixer it flows smoothly, but as soon...
CoopersWater submitted a business listing in the plumbers directory:
Kris Griffith - Plumbing & Water Treatment in Indianapolis since 1980
Checkout this business listing... - Please leave a review for this company if you have used them before. You can add your own plumbing business to our...
I have a heating system comprised of skirting radiators that form part of a loop from the boiler, round the house and back. Some rooms get warmer than others despite closing off the skirting radiator heat vent. They are designed to house the finned heating pipe and a return pipe, the latter...
My living room smells like a sewer but I can't tell where it is coming from. Not sure where to start looking. The saniflo discharge pipe runs above but there is no sign of leakage on the ceiling. The main drain run from the manhole at the back runs under the kitchen, which has a solid floor...
Hello, I've just found this forum and wondering if anyone can please help us. We've not long moved into our new home. It's has Johnson and Starley warm air heating and hot water tank in airing cupboard. All has been working fine until yesterday. We had the water softener serviced and since then...
Hi All, does anyone know why the water only fills 1/3 of the way please?
How to clean the scale inside the casing and pipe rows of industrial boiler headers, in addition to chemical methods? What is the approximate lifespan of the end caps at both ends of the header box? Is it feasible to clean the cut end face?
I want to try using a blowing machine to blow out the...
Hi all. Not sure if it's a plumbers job or another trade but thought I'd ask.
I am installing a new toilet downstairs next to an outside wall. There is a 3 way inspection/access chamber about 1.5 metres outside this point which I plan on going into. It has one inlet in use from the upstairs WC...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
king of pipes no reply from private message
- Started by cjg
- Replies: 0
-
-
-
Why pressure gauge drop without leak
- Started by sanju pradeep
- Replies: 2
-
Hot water so hot tap and shower via our hot water tank
- Started by thecar
- Replies: 4
-
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 2
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
DUK Pipes for thermostat shower fitted at different heights
- Started by Delforkids
- Replies: 2
-
-
-
SPorcelanosa KRION Attica screen 1.2m, anyone?
- Started by Sebastian T
- Replies: 0
-
Cistern filling one third of the way
- Started by dwaindigital
- Replies: 4
-
Boiler losing pressure only on central heating- Started by SnosRap75
- Replies: 6
-
tanking. Is it ok to just seal everything with plastic.
- Started by Staggersandfalls
- Replies: 3