Search the forum,

Boss Boiler Condensate Pump packed in

Post new thread

Discuss Boss Boiler Condensate Pump packed in in the USA area at PlumbersForums.net

J

Justice League

Messages
150
So the boiler wasn't powering on because the condensate pump had packed in, well the pump had swicthed off and thus cut the power to the boiler. Once the pump was decanted of its water, the boiler tuned on.

So the pump needs replacing - should I replace with another Boss or are there better pumps on the market?

Plumbright Condensate Pump (Automatic) Ps

This Plumbright condensate pump is a fully automatic system for removing condensate from condensing boilers. Designed with safety in mind, it features flame-retardant ABS plastic alongside stainless steel, thermal overload protection and a high-level safety switch. Supplied with 6m of 3/8' ID...
www.cityplumbing.co.uk www.cityplumbing.co.uk
 
Pump house ones are decent depends how long you’ve had the boss one ?
 
In reality around 30 mins but you will be billed for an hour

If the hose needs replacing as well depends on route / access
 

Reply to Boss Boiler Condensate Pump packed in in the USA area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
149
John.g
J
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
266
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
209
PSxxxxxx
P
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
236
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
214
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Talk
DIY Advice
Tile Blog
Electrical Advice
Tiling Standards BS5389
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock