I have a isolating stopcock in my bathroom but it switches off both the w.c inlet and the shower. As the shower plumbing is buried in the wall under the tiling, will my only option( for a sole shower isolating stopcock ) will be to install it in the loft? Would be glad of your advice.Thanks
Discuss Shower isolating stopcock query in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 34,332
- Solutions
- 2
Yes as Riley said find the pipework to the shower and fit one as close as possible
Also you need / will want a full bore ISO / lever valve
Also you need / will want a full bore ISO / lever valve
- Status
Reply to Shower isolating stopcock query in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Hi All
I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Hi, basic question, any insight much appreciated.
Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Pop quiz, does anyone recognise this radiator valve?
- Started by dimuc
- Replies: 0
-
Replacing outdoor P-Trap Gully with Bottle Gully
- Started by DIwhYdidIstartThis
- Replies: 0
-
-
-
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 2
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 3
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 5
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 2
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
