Search the forum,

Discuss Grundfos UPS3 - Central Heating Pump in the Central Heating Forum area at PlumbersForums.net

Messages
11
When a pump is switched off does circulating water stop immediately? In other words, is there a bypass within in the pump to allow the water to slow down to a stop?

Thanks for any advice
 
It stops pumping but the water doesn’t stop right away but eventually will stop

Hence sometimes you will get the pump pcb lighting up without power
 
When a pump is switched off does circulating water stop immediately? In other words, is there a bypass within in the pump to allow the water to slow down to a stop?

Thanks for any advice
Water can flow straight through a centrifugal pump when it's not running, with only a small headloss. So flow will continue for a short while after the pump stops.
 

Reply to Grundfos UPS3 - Central Heating Pump in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
149
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
143
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
169
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
295
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
240
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock