heatrae sadia 25l 9004010.

[Matt0029]

The distance between the base of the cylinder and the hot tap outlet is around 1meter. So this would give 0.1 bar pressure. What flow rate would this likely give?

 

[John.g]

Maybe 2.0 to 2.5 LPM based on my tap.qqqqqqqqqq 50 chacters to post

 

[Matt0029]

Thanks I don't think it is that at the moment. Possibly abit of an airlock/ breather pipe blockage.

 

[Matt0029]

If it does flow at a decent enough level. If were to fit dual flow taps. Doesn't mix in tap mixes after leaves the spout. Would single checks not be needed to avoid back flow

 

[John.g]

Probably not, I have a d/stairs mixer like that where it mixes in the spout, 3.0bar cold & 0.5bar Hot gravity, no problems.