You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
overheating
Overheating of an economy occurs when its productive capacity is unable to keep pace with growing aggregate demand. It is generally characterised by a below-average rate of economic growth, where growth is occurring at an unsustainable rate. Boom periods are often characterised by overheating in the economy. An economy is said to be overheated when inflation increases due to prolonged good growth rate and the producers produce in excess thereby creating excess production capacity. The main reason behind overheating is insufficient supply allocation because of excess spending by the people due to increase in consumer wealth.
Hi All,
Have a peculiar problem with my Gloworm Flexicom 30cx combi boiler, the main heat exchanger is getting red hot and fault coding on overheat even though the boiler and central heating is not on, i shut the boiler down for a while, clear the fault code and it will be fine again for...
Got a Worcester green star 28i junior that was blowing off, replaced PRV now it won’t pressurise at all, just fills for a few minutes then blows out the PRV, heating and hot water still work if system not over filled. If bypass is shut boiler overheats and cuts out, thinking it’s the heat...
I have a water filled towel rail which has been working for several years.
It is now getting very hot and making a noise.
Do these loose water over time and need topping up?
Could this be the problem or a faulty thermostats or element?
Any way to diagnose the problem?
Thanks
Hi everyone,
I just moved into a property with a combi gas boiler. It's a Baxi 600. It heats the radiators and the hot water. However, the temperature of the water seems very high for both central heating and running water. The boiler's dials for both temperatures are on the front of the...
Hi All,
My nans hot water recently stopped working which resulted in an extremly over priced plumber coming out and replacing both elements in the immersion tank. Aside from a huge price tag, it seemed the issue was resolved... until a few weeks back
The cut off switch keeps going off if the...
Hi,
I have a Grant combi and the PRV is passing and constantly dripping hot water. The boiler pressure is around 2.2bar, which is close to the 2.5bar PRV setting.
I firstly vented the pressure down to 1.2 bar and it rose back up in less than an hour.
I checked the expansion tank and there was...
I have a viessmann vitodens 050-W BPJD. Central heating working as it should however the hot water is getting to high, reaching 90 degrees cutting out to cool down and then starting again. Seems very noisy in hot water mode also. I’m going to clean the plate heat exchanger once the new washers...
Hi all. I have an Ideal Classic FF2 100 with a sealed system and a megaflow. Twenty years old, and serviced regularly. The problem is that once every few hours the boiler runs very hot and cuts out on the overheat thermostat. It seems to be ignoring the temperature control knob - it doesn't cut...
I have a constant problem with the potterton pro max store: it trips frequently or overheats with error e110 when central heating is on. This has been happening for the last year or longer. It happens 1-2 times a week sometimes more often. Baxi guys were here 8 times with no success: they have...
Hello, i have a job that had an immersion heater overheating, i didn't know how old it was so just replaced it as they don't seem to last these days. Within a week it had overheated, so i reset it. Now a month later it has gone again, and maybe once more.
It's a 14" immersion, incoloy/titanium...
Need a little advice with the above boiler as there's no tech advice and boiler readings available. Just overheating and pressure going to 3 bar only sometimes with DHW demand. It's has a new plate heat exchanger. Many thanks
Hi just wondering if anyone can shed any light on an issue i'm having with my boiler..
Initially started i think after i came back of holiday and the pressure was low on my boiler after topping up everything was fine and boiler operated as normal. A day or so after however i started noticing...
Hi just wondering if anyone can shed any light on an issue i'm having with my boiler..
Initially started i think after i came back of holiday and the pressure was low on my boiler after topping up everything was fine and boiler operated as normal. A day or so after however i started noticing...
Hello,
Any help on this would be greatly appreciated before I call out a professional, as I have tried every thing I can think of.
Basically I have a British Gas 330 condensing boiler and a y plan system. I have turned off the boiler, drained the system, refilled and removed air from all rads...
problems with combi, heating control thermostat doesn’t seem to click off when you turn the knob to min after it’s been on for 10mins? Also the customer says the boiler switches off after 20mins but the high limit hasn’t been activated?
Hot water is fine just the heating overheating and...
boiler goes to overheat lockout if you let it cool and press reset it works for 15 mins then locks out again, it also makes a noise like a foghorn for about 5 to 10 seconds at ignition i have checked all limit stats all are ok also replaced the combustion door seal, cleaned the burner it does...
Hi All,
I'm struggling with a Heatline Condense combi which is turning itself off within about 20 seconds every time the heating is turned on. The flow pipe is scalding hot, the return stays cold. I've tried fully opening the valves on all 10 rads, as far as I can tell the pump and diverter...
I have a overheating issue very few days with my boiler when the UFH is on have to reset CH and HW all working perfect. My UFH is polypipe with a Baxi boiler. I have had a baxi engineer out to look at the boiler who has advised that the UFH needs balancing as the heat from boiler is not...
hi. I have a new build property with central heating. There’s two zones both independently controlled with danfoss digital wired thermostats. One zone (the lounge) has two radiators. The stat is on programmable mode. The room is over heating. The stat is sensing the room temp is above the set...
Hi, this is my first post and am hoping someone can help me with a problem I've got.
I've got a Vaillant Ecotec 937 with the storage pack its 6 years old and has been fine up till now. I am not getting no hot water at all, the boiler fires up when I open the hot tap and the plate heat exchanger...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.