Search the forum,

Discuss Programmable room thermostat for ideal logic in the Plumbing Jobs | The Job-board area at PlumbersForums.net

PhoenixServices

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,032
hi guys.
After recommendations for a programmable room thermostat.
Preferably wired and if possibly weather compensation.
It is going on a older model ideal logic combi.
 
hi guys.
After recommendations for a programmable room thermostat.
Preferably wired and if possibly weather compensation.
It is going on a older model ideal logic combi.

Someone asked this same question yesterday:

Best programmable room thermostat for old idea logic

Consensus seemed to be

Honeywell CM707

for the prog/stat. Weather compensation is a separate issue and I'm not sure that boiler has it as an option. Which model is it precisely?
 
Last edited:
needs to be logic plus for weather comp. also if you want to go down the weather comp route you need an open therm controller with it so the boiler can compare outside and inside temps and decide at what flow temp to fire the boiler. one without the other is just guesswork
 
Last edited:

Reply to Programmable room thermostat for ideal logic in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
192
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
198
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
205
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock