Hi, i recently finished my domestics ACS qualification. I have all my domestic appliances along with unvented hot water, essential electrics and EUSR. I am Glasgow based and have my own gas safe registration, own tools and gas analyser. I am ideally looking for full time employment, does anyone know of work available in Glasgow? I am willing to work with someone to gain further experience. Thanks for your time. Mick
- Thread starter Mick021
- Start date
- Replies 0
- Views 1K
- engineer gas gas engineer looking looking for work work
Discuss Gas Engineer looking for work in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Gas Engineer looking for work in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi all
Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Hi All
I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 1
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it
- Started by sammie81116
- Replies: 3
-
-
-